Back to top
08061034815
Send SMS Send Inquiry

Impregnators

Impregnators
X

Product Description

Stone Protectors, Sealers & Impregnators

HYDRO SHIELD protects marble, granite, natural stone and general masonry surfaces such as, stone cladding, concrete, pavers and marble cement/ resin agglomerates from water, moisture and general stains such as of dirt, mould and mildew. The water/dirt repellent action is due to its technologically advanced formulation, protecting deep inside the stone pores for a long period of time. HYDRO SHIE LD does not change the natural aspect ofthe stone or to the sanded grout surface and it will not create any type of film or plastic effect, while allowing vapour to escape, UV resistant.

Directions for use: Apply by cloth, brush or spray HYDRO SHIELD uniformly on a clean and dry surface. If applied by spray, remove any air bubbles. For absorbent materials; After a curing time of 5/6 hours, apply a second coat in a different direction to the first. We suggest to allow 12- 24 hours, curing time before resuming normal use of the treated surface.

Coverage per lit
  • High Porosity Surface 3-5 m2
  • Medium Porosity, Honed Stone 4-6 m2
  • Low Porosity Stone 16-20 m2

Art No.

Vol

Pcs x Cr

66015

1 Ltr.

12


Enter Buying Requirement Details
Email Id
Mobile number